undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

Metal corrugated packing Stainless steel corrugated plate structured packing 125 250 350 Y metal orifice plate corrugated

Product varieties are all kinds of silicone oil, silicone rubber, silicone surfactant additives, silicone softener series, fabric refining washing and finishing auxiliaries and solar silicon wafer cleaning agent and a series of products.

Keywords: all kinds of silicone oil, cleaning agent

Metal corrugated packing is metal corrugated structured packing and orifice plate corrugated packing. In three-phase separators for oil and gas and coalbed methane treatment, it is called coalescing packing and oil-water separation packing. The product is made of metal materials such as 304, 304L, 321, 316, 316L, 2205 and other stainless steel strips, which are knurled and punched (or without holes as needed), and then pressed into several corrugated plates, which are stacked vertically according to certain diameter requirements. Combined to form a disc-shaped structured packing. The tooth shape angle β of the corrugation is about 79o-80o. The inclination angle α of the corrugated channel and the vertical direction is 45o for Y-shaped and 30o for X-shaped. The corrugations of adjacent corrugated square pieces have opposite inclination directions, and the corrugations of adjacent packing disks up and down Cut into 90o crosses. The shape of a single disk is as shown below.

Key words:

Metal filler series 、Plastic filler series

Classification:

Product Consulting:

Product Description

1. Introduction to orifice plate corrugation

Metal corrugated packing is metal corrugated structured packing and orifice plate corrugated packing. In three-phase separators for oil and gas and coalbed methane treatment, it is called coalescing packing and oil-water separation packing. The product is made of metal materials such as 304, 304L, 321, 316, 316L, 2205 and other stainless steel strips, which are knurled and punched (or without holes as needed), and then pressed into several corrugated plates, which are stacked vertically according to certain diameter requirements. Combined to form a disc-shaped structured packing. The tooth shape angle β of the corrugation is about 79o-80o. The inclination angle α of the corrugated channel and the vertical direction is 45o for Y-shaped and 30o for X-shaped. The corrugations of adjacent corrugated square pieces have opposite inclination directions, and the corrugations of adjacent packing disks up and down Cut into 90o crosses. The shape of a single disk is as shown below.

Metal corrugated packing has a high number of theoretical plates per meter, the pressure of each theoretical plate is 0.3~1.8mbar, and the optimal operating load factor is 1.5~3m/s√kg/m3. Metal orifice plate corrugated packing has a wide range of applications , can be applied to tower diameter: 0.1~12m; pressure: vacuum to pressurized; flow rate: 0.2~300m3/m2·h.

Metal orifice plate corrugated structured packing is installed in a flange-connected tower with a smaller diameter. The corrugated packing is made into a complete disk with a diameter slightly smaller than the inner diameter of the tower. In the tower with a larger diameter, each disk of corrugated packing is divided into several pieces, which are put into the tower through the manhole and pulled together into complete disks in the tower. The corrugated sheets of the upper and lower disks of packing are rotated 900 degrees and installed, so that the fluid Mix thoroughly in the tower.
The stainless steel orifice plate corrugated packing plate is punched with φ4-4.5mm holes and a number of slits about 5mm long, which enhances the wetting performance and may form two-way penetration. The opening rate is about 8.5-12%. The surface of the perforated plate has Special texture to increase effective mass transfer area. Its separation ability is similar to that of wire mesh corrugated packing, but its blocking resistance is stronger than that of corrugated packing.

2. Technical parameters

                    Metal plate corrugated filler technical parameters

 model

Specific surface area a 2m3 /m2

 Hydraulic diameter de mm

Porosity ε 2m3 /m2

 Inclination angle β degrees

125x/y

 125

32

98.8-99.1

30/45

250x/y

250

16

97.5-98

30/45

350x/y

 350

 11.5

96.5-97.5

 30/45

450x/y

 450

 9

95.5-96.2

 30/45

500x/y

 500

 7.0

95-96.3

 30/45

700x/y

 700

 4.3-4.5

93.5-94.5 

 30/45


3. Application occasions of metal corrugated plate filler:

Metal plate corrugated packing is mainly used in petrochemical industry, fertilizer industry, natural gas purification, smelting, etc. Such as coal chemical industry (benzene washing tower, desulfurization tower, benzene removal tower for recovering crude benzene in the coking plant), as well as ethylstyrene separation, high-purity oxygen preparation, propylene oxide separation, debutanizer tower, cyclohexane recovery, Gasoline fractionation, atmospheric and vacuum refining equipment, fatty acid, cyclohexane/cycloethanol, lactam and other absorption regeneration towers.

The products are widely used in mass transfer equipment for distillation, rectification, absorption, desorption, extraction, chemical exchange, washing, regeneration, heat transfer, stripping, flash evaporation, foam capture and other occasions, and have a large circulation capacity. quantity and higher separation efficiency:

Metal stainless steel orifice plate corrugated packing is used in three-phase separators or two-phase separators in the processing of crude oil and natural gas as oil-water separator packing, coalescing plate packing, and vapor-liquid separation packing.

Petrochemical industry: ethylene/styrene separation, high-purity oxygen preparation, superposed oil separation, propylene oxide separation, debutanizer, cyclohexane recovery, gasoline fractionation, atmospheric and vacuum refining, gasoline sweetening, formaldehyde absorption tower, Ring recovery tower, gasoline fractionation tower, catalytic reforming pre-fractionation tower, refinery lubricating oil type vacuum tower, refinery catalytic cracking unit stabilization tower, aromatic hydrocarbon separation and solvent oil separation tower, depropanizer tower, pressurized distillation tower ;

Fertilizer industry: Comprehensive scrubber tower for gas production, saturated hot water tower, ammonia recovery tower, desorption tower, variable saturated hot water tower, decarbonization tower, methanol distillation tower, ammonia recovery tower and scrubber in the nitrate compound fertilizer project , ammonia-air mixer;

Environmental protection industry: nitrogen-containing ammonia recovery, waste acetone recovery, dimethylformamide high-purity recovery, acidic sewage stripping tower and other devices;

Coal chemical industry: benzene washing tower, desulfurization tower, benzene removal tower, shift degreaser, high-pressure ammonia washing tower, water washing tower, deoiling tank, methanol absorption tower, water gas desulfurization tower, coal processing tower for recovering crude benzene in coke oven gas in coking plant Stripper purification device in urea project;

Oil, gas, and coalbed methane treatment: used as oil-water separator packing, coalescing plate packing, and vapor-liquid separation packing in three-phase separators or two-phase separators during the processing of crude oil and natural gas.

Stainless steel corrugated plates have been successfully used in wet natural gas (main component CH4) filter separator P250I packing; oil and gas field primary three-phase separator SCYSII packing corrugated separation components, natural gas dragging liquid separation material corrugated plate packing, heavy hydrocarbon scrubber packing model is winpak-2 and dechlorination tower winpak-2 packing (M750Y); the three-phase separator coalescing component separates the packing in front of the coal bed methane compressor unit to remove solid particles, dust and liquid droplets entrained by the transported gas. Filtration efficiency ≤3μm≥97%, ≤5μm≥99%; solid impurities: ≤3μm≥99%, ≤5μm≥99.5%.

Product inquiry

With strong technical force and complete testing means, the enterprise has passed the ISO9001 quality system certification. All kinds of tower internals, tower and packing products are widely used in oil refining, chemical industry, telephone fee, caustic soda, sulfuric acid, electric power, sewage treatment, coking gas and pharmaceutical industries, and are well received by users.

Landline:

18679986350

Address:

West District of Pingxiang High-tech Industrial Park


Copyright of Copyright 2023 Pingxiang Tiansheng Chemical Equipment Co., Ltd. This website has supported IPv6 
Powered by www.300.cn  SEO Tags

Business License